Component cleaning equipment and fluids | Soldering products

+44 (0) 1506 443058

KlensTek® M Series. Effective, eco-friendly and safe metal cleaning.

klenstek-logoThe KlensTek® M Series of aqueous metal cleaning agents has been specially designed to meet the demands of critical metal component cleaning applications and stringent environmental and health and safety standards. The goal: to provide best-in-class performance with some of the safest products available.

We can advise on the best solution to your cleaning challenges and can run full evaluation trials at one of our two UK-based trial and demonstration facilities. We also specify and supply solvent and vapour phase cleanings agents.

Klenstek M11-L Aqueous spray-in-air quick-break oil degreaser Fraser Technologies

Aqueous spray-in-air quick-break degreaser

KlensTek® M11-L is formulated for the fast, effective removal of medium-to-heavy soils including cutting fluids, grease, and general particulate from metals including steel, stainless steel, brass, copper and aluminium.

KlensTek® M09-L Aqueous spray-in-air quick-break oil degreaser

Aqueous spray-in-air quick-break oil degreaser

KlensTek® M09-L swiftly and effectively removes light-to-medium soils including cutting fluids, grease, and general particulate from metals including steel, stainless steel, aluminium, brass and copper.

KlensTek® M11-L:

  • Has excellent low-foam properties
  • Is non-flammable and biodegradable
  • Low odour
  • Corrosion protected
  • Water rinsable
  • Is separator/interceptor friendly
  • has quick-break action*

*allows oils to be to be separated out, leaving behind wastewater with little or no hydrocarbon content

Specifically designed for multi-metal applications including steel, brass, copper and stainless steel. Can be used with care on aluminium and after use or left to dry.

  • Use diluted in ultrasonic cleaning machines
  • At 60°C, dilute to 4% at ambient temperatures, dilute to 10%

KlensTek® M09-L:

  • Has excellent low foam properties
  • Is non-flammable, with a low-hazard profile
  • Low odour
  • Corrosion protected
  • Interceptor friendly
  • Biodegradable
  • Water rinsable
  • Is separator/interceptor friendly
  • Has a quick-break action*.

*allows oils to be to be separated out, leaving behind wastewater with little or no hydrocarbon content

Specifically designed for multi-metal applications including steel, brass, copper and stainless steel. Can be used with care on aluminium and rinsed after use or left to dry.

  • Use diluted in spray or immersion cleaning machines
  • At 60°C, dilute to 4%.

 

KlensTek M09-U Aqueous ultrasonic cleaning agent

Aqueous ultrasonic cleaning and degreasing agent

KlensTek® M09-U is formulated for the fast, effective removal of light-to-medium soils including cutting fluids, grease, and general particulate, from metals including steel, stainless steel, aluminium, brass and copper.

Klenstek MO2-C Aqueous carbonate scale remover

Aqueous carbonaceous descaler/metal brightener

KlensTek® M02-C is an effective, low-fume phosphoric acid-based descaler. Brightens stainless steel and copper alloys; removes rust and stains from steel, stainless steel and copper alloys; usable with care on aluminium and magnesium alloys.

KlensTek® M09-U:

  • Has excellent cavitation and cleaning properties
  • Is non-flammable and biodegradable
  • Is separator/interceptor friendly
  • Has a quick-break action

Specifically designed for multi-metal applications including steel, brass, copper and stainless steel. Can be used with care on aluminium and rinsed after use or left to dry.

  • Use diluted in ultrasonic cleaning machines
  • At 60°C, dilute to 4%
  • At ambient temperatures, dilute to 10%.

KlensTek® M02-C

  • Leaves an iron phosphate deposit on mild steel, improving corrosion protection
    contains biodegradable surfactants which speed descaling
  • Fewer fumes than traditional descalers
  • Is non-flammable

Specifically designed for multi-metal applications including steel, brass, copper and stainless steel. Can be used with care on aluminium and rinsed after use or left to dry.

  • Use diluted in spray or immersion cleaning machines
  • Rinse with clean water and dry if necessary
  • Dilute 2%-25% dependent on application

About aqueous processes

Aqueous cleaning is a low cost, environmentally friendly method of cleaning metal parts and components. The process uses less hazardous materials to wash even the most stubborn contaminants to ensure the highest levels of cleanliness are achieved. The cost of waste disposal is of equal concern and the lower they can be the better.

With increasing pressure from industry to deliver cleaner, environmentally friendly products it is important that customers cannot only show but can technically prove just how clean their products are.

When deciding, which aqueous solution is right for your requirement the first step is to determine what contaminants require cleaning followed by what level of cleaning is deemed acceptable. There are varying standards relating to levels of cleanliness in different industries but the end goals are all the same; clean components and clean parts reduce lead time, improve processes resulting in higher efficiency, lower costs, extend the lifetime of equipment and more importantly result in a happy end customer.

At Fraser Technology, our in-house technical expertise and free trial service enable users to try and test a variety of aqueous solutions to suit their needs. We not only supply the physical solution we provide on-going support designed to help you achieve your goals.