Follow us on Linkedin   |   Component cleaning and fluids. Soldering products.

KlensTek® M Series. Effective, eco-friendly and safe metal cleaning.

klenstek-logoThe KlensTek® M Series of aqueous metal cleaning agents has been specially designed to meet the demands of critical metal component cleaning applications and stringent environmental and health and safety standards. The goal: to provide best-in-class performance with some of the safest products available.

We can advise on the best solution to your cleaning challenges and can run full evaluation trials at one of our two UK-based trial and demonstration facilities. We also specify and supply solvent and vapour phase cleanings agents.

KlensTek® M11-L

klenstek-m11-l-5l

KlensTek® M11-L is formulated for the fast, effective removal of medium-to-heavy soils including cutting fluids, grease, and general particulate from metals including steel, stainless steel, brass, copper and aluminium.

Specifically designed for multi-metal applications including steel, brass, copper and stainless steel. Can be used with care on aluminium and after use or left to dry.

  • Use diluted in ultrasonic cleaning machines
  • At 60°C, dilute to 4% at ambient temperatures, dilute to 10%

KlensTek® M11-L:

  • Has excellent low-foam properties
  • Is non-flammable and biodegradable
  • Low odour
  • Corrosion protected
  • Water rinsable
  • Is separator/interceptor friendly
  • has quick-break action*

*allows oils to be to be separated out, leaving behind wastewater with little or no hydrocarbon content

KlensTek® M09-L

klenstek-m09-l-5l

Aqueous spray-in-air quick-break oil degreaser – swiftly and effectively removes light-to-medium soils including cutting fluids, grease, and general particulate from metals including steel, stainless steel, aluminium, brass and copper.

Specifically designed for multi-metal applications including steel, brass, copper and stainless steel. Can be used with care on aluminium and rinsed after use or left to dry.

  • Use diluted in spray or immersion cleaning machines
  • At 60°C, dilute to 4%.

KlensTek® M09-L:

  • Has excellent low foam properties
  • Is non-flammable, with a low-hazard profile
  • Low odour
  • Corrosion protected
  • Interceptor friendly
  • Biodegradable
  • Water rinsable
  • Is separator/interceptor friendly
  • Has a quick-break action*.

*allows oils to be to be separated out, leaving behind wastewater with little or no hydrocarbon content

KlensTek® M09-U

klenstek-m09-u-5l

Aqueous ultrasonic cleaning and degreasing agent is formulated for the fast, effective removal of light-to-medium soils including cutting fluids, grease, and general particulate, from metals including steel, stainless steel, aluminium, brass and copper.

Specifically designed for multi-metal applications including steel, brass, copper and stainless steel. Can be used with care on aluminium and rinsed after use or left to dry.

  • Use diluted in ultrasonic cleaning machines
  • At 60°C, dilute to 4%
  • At ambient temperatures, dilute to 10%.

KlensTek® M09-U:

  • Has excellent cavitation and cleaning properties
  • Is non-flammable and biodegradable
  • Is separator/interceptor friendly
  • Has a quick-break action

KlensTek® M02-C

klenstek-m02-c-5l

This aqueous carbonaceous descaler/metal brightener is an effective, low-fume phosphoric acid-based descaler. Brightens stainless steel and copper alloys; removes rust and stains from steel, stainless steel and copper alloys; usable with care on aluminium and magnesium alloys.

Specifically designed for multi-metal applications including steel, brass, copper and stainless steel. Can be used with care on aluminium and rinsed after use or left to dry.

  • Use diluted in spray or immersion cleaning machines
  • Rinse with clean water and dry if necessary
  • Dilute 2%-25% dependent on application

KlensTek® M02-C

  • Leaves an iron phosphate deposit on mild steel, improving corrosion protection
    contains biodegradable surfactants which speed descaling
  • Fewer fumes than traditional descalers
  • Is non-flammable

As experts in the field, Fraser Technologies have a deep understanding of the challenges and opportunities facing our clients’ industries and sectors. Our insights and independent recommendations are based on over 55 years experience, and rigorous analysis of the options available to you.

Fraser Technologies